ear47mtete|2020D4119D38|logicpower_db|lpr_productMaster|pr_desc|0xfdff31ce060000000609000001000100
- Only company in India to receive Manufacturing License from MICROCHIP USA
- Indigenously Manufactured in India with 1 year Warranty
- BE INDIAN BUY INDIAN!! Dont buy M&W type cheap Chinese PICkit 3 Clones. Beware of the M type cheap PICkit 3 Clone, this is not the original Microchip PICkit 3
- Only company providing after sale Service Backup & Tech Support in India
- High Speed 4 Layer, Gold Immersion pcb. Genuine Components- imported directly from Microchip, Samtec, etc.
PICkit3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware. The MPLAB PICkit3 allows debugging and programming of PIC and dsPIC Flash microcontrollers at a most affordable price using the MPLAB Integrated Development Environment (IDE) or MPLAB X IDE. The MPLAB PICkit3 is connected to the design engineers PC using a full speed USB interface and can be connected to the target via RJ-11 to ICSP connector (LPISCP-AC164110).
The PICPROG-V.6.11 Demo board is specially designed for
Microchip’s 8-bit,16-bit and 32-bit microcontrollers. Board also
support 8-pin to 40-Pin DIP PIC microcontroller.
- · PICkit3 Programmer Debugger.
- · A to mini-B USB Cable.
- · CD containing MPLAB IDE, Demo version C Compiler for 8bit MCU’s, PICkit3 Debug Express Lessons, Manuals & User Guides.
- . 6 Pin ICSP Cable (Male to Female)
- · User Manual.
- PICPROG board
- PICPROG User Manual
PICKit 3 Programmer Feature:
· USB (Full speed 12 Mbits/s interface to host PC)
· Real-time execution
· MPLAB IDE & MPLAB X IDE compatible
· Built-in over-voltage/short circuit monitor
· Firmware upgradeable from PC/web download
· Totally enclosed
· Supports low voltage to 2.0 volts (2.0v to 5.5v range)
· Diagnostic LEDs (power, busy, error)
· Read/write program and data memory of the microcontroller
· Erase of program memory space with verification
· Freeze-peripherals at the breakpoint
· Program up to 512K byte flash with the Programmer-to-Go.
PICPROG Features:
40-Pin Zip socket for easy inserting and removing the MCU
• Board dimensions 139mm x 89mm
• ICSP connection for connecting demo board with the PICkit2/
PICkit 3/ MPLAB ICD3/ MPLAB PICkit 4/ MPLAB ICD4 etc
• RJ-11 connection for connecting demo board with the
PICkit2/ PICkit 3/ MPLAB ICD3/ MPLAB PICkit 4/ MPLAB ICD4
etc
• 9V, 500mA DC external power supply Jack for providing the
external power to the demo board
• Four Red LEDs connected to PORTB and Power Supply through
the jumper
• 4 MHz external crystal
• AMS1117 for 5V power and 3.5V power to the MCU and LED’s
• Jumper J1-J14 are provided for PORT connections
• Jumper J15-J22 are provided for 4 MHz external crystal connections
• Jumper J23 and J24 are provided for PORT LED
• Switch S1 and S2 are provided for Power Supply LED’s (5V
and 3.5 V resp.)
• Switch S1 and S2 are provided for Vcap 1 and Vcap 2
• Vcap is provided for PIC18/24/32 MCU